บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด : Posilock (R)

Product Detail :

MWHQQQ.JPG [679x894px] ฝากรูป

bWw0L8.JPG [678x896px] ฝากรูป

The PSL-K type is a mechanical-type shaft lock joint. By fastening the clamping bolt, the outer sleeve moves in an axial direction. At this time, a force that pushes the inner surface of hub and shaft is generated by the wedge effect of the inner sleeve and taper surface to perfectly fasten a shaft and hub. The wedge effect is augmented by the inner sleeve groove to achieve high transmission torque. The Standard PSL-K is a steel specification.

Bore diameter	6mm to 42mm
Maximum permissible torque	5.9Nm to 750Nm
Maximum permissible thrust power	1950N to 36000N

raz3qb.JPG [679x893px] ฝากรูป

PSL-K-B Type

The PSL-K-B type is a mechanical-type shaft lock joint. By fastening the clamping bolt, the outer sleeve moves in an axial direction. At this time, a force that pushes the inner surface of hub and shaft is generated by the wedge effect of the inner sleeve and taper surface to perfectly fasten a shaft and hub. The wedge effect is augmented by the inner sleeve groove to achieve high transmission torque. For the PSL-K-B type, a hexagon bolt is used for the clamping bolt. It can be assembled if there is not enough space in a thrust direction.

Bore diameter	6mm to 42mm
Maximum permissible torque	5.9Nm to 750Nm
Maximum permissible thrust power	1950N to 36000N

wSpAxq.JPG [680x893px] ฝากรูป

PSL-K-C Type

The PSL-K-C type is a mechanical-type shaft lock joint. By fastening the clamping bolt, the outer sleeve moves in an axial direction. At this time, a force that pushes the inner surface of hub and shaft is generated by the wedge effect of the inner sleeve and taper surface to perfectly fasten a shaft and hub. The wedge effect is augmented by the inner sleeve groove to achieve high transmission torque. The PSL-K-C type is a simple anti-rust specification with electroless nickel plating coated on its body.

Bore diameter	6mm to 42mm
Maximum permissible torque	5.9Nm to 750Nm
Maximum permissible thrust power	1950N to 36000N

BVjz4i.JPG [681x896px] ฝากรูป

PSL-K-F Type

The PSL-K-F type is a mechanical-type shaft lock joint. By fastening the clamping bolt, the outer sleeve moves in an axial direction. At this time, a force that pushes the inner surface of hub and shaft is generated by the wedge effect of the inner sleeve and taper surface to perfectly fasten a shaft and hub. The wedge effect is augmented by the inner sleeve groove to achieve high transmission torque. The PSL-K-F type is an antirust specification with stainless material used on its body.

Bore diameter	6mm to 35mm
Maximum permissible torque	4.7Nm to 504Nm
Maximum permissible thrust power	1560N to 28800N

MnSrNu.JPG [679x895px] ฝากรูป

PSL-G Type

The PSL-G type is a mechanical-type shaft lock joint. By fastening the clamping bolt, the outer sleeve moves in an axial direction. At this time, a force that pushes the inner surface of hub and shaft is generated by the wedge effect of the inner sleeve and taper surface to perfectly fasten a shaft and hub. The standard PSL-G type is a steel specification.

Bore diameter	19mm to 120mm
Maximum permissible torque	289Nm to 13500Nm
Maximum permissible thrust power	30500N to 225000N

TaoyzV.JPG [679x893px] ฝากรูป

PSL-G-C Type

The PSL-G-C type is a mechanical-type shaft lock joint. By fastening the clamping bolt, the outer sleeve moves in an axial direction. At this time, a force that pushes the inner surface of hub and shaft is generated by the wedge effect of the inner sleeve and taper surface to perfectly fasten a shaft and hub. The PSL-G-C type is a simple anti-rust specification with electroless nickel plating coated on its body.

Bore diameter	19mm to 60mm
Maximum permissible torque	289Nm to 2810Nm
Maximum permissible thrust power	30500N to 93600N

wJ9D3r.JPG [679x894px] ฝากรูป

PSL-D Type

The PSL-D type is a mechanical-type shaft lock joint. By fastening the clamping bolt, the outer sleeve moves in an axial direction. At this time, a force that pushes the inner surface of hub and shaft is generated by the wedge effect of the inner sleeve and taper surface to perfectly fasten a shaft and hub. The standard PSL-D type is a steel specification.

Bore diameter	6mm to 50mm
Maximum permissible torque	6Nm to 1760Nm
Maximum permissible thrust power	2100N to 70300N

9m1axp.JPG [681x891px] ฝากรูป

PSL-D-C Type

The PSL-D-C type is a mechanical-type shaft lock joint. By fastening the clamping bolt, the outer sleeve moves in an axial direction. At this time, a force that pushes the inner surface of hub and shaft is generated by the wedge effect of the inner sleeve and taper surface to perfectly fasten a shaft and hub. The standard PSL-D-C type is a simple anti-rust specification with electroless nickel plating coated on its body.