บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด : Linear Motion

PAGE VIEW : 11,766

Product Information :

Name :

Linear Motion

Category :

เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล

Sub - Category :

11 Miki Pulley Electro-Magnetic Clutch and Brake

Brand :

Miki Pulley

Model :

SHM, SHD, YRL, Roh'lix

Product Type :

สินค้า, ผลิตภัณฑ์

Short Description :

Linear Motion Miki pulley's linear motion products consist of very unique products, such as linear shaft drive and Rohlix. Linear shaft drive is a new cylinder model linear motor system which was designed to be driven by a most simple system. Rohlix converts rotational motion into linear motion by a lead of helix of six ball bearings installed in Rohlix at certain angles. Both are very unique Miki products. Linear Shaft Drive Linear shaft drive is a new cylinder model linear motor system which was designed to be driven by a most simple system. Driving without an external position sensor is possible because magnetic flux occurred from shaft enables position detection.　It can occur thrust force immediately after starting because position of magnetic pole can be detected by the built-in position sensor that enables operation without preparing with external magnetic pole detecting elements.　In addition, complex positioning driving is possible without an outer controller because the driver is built-in with positioning driving function. SHM/SHD Model SHM/SHD Model is a new cylinder model linear motor system which was designed to be driven by a most simple system.Driving without an external position sensor is possible because magnetic flux occurred from shaft enables position detection. It can occur thrust force immediately after starting because position of magnetic pole can be detected by the built-in position sensor that enables operation without preparing with external magnetic pole detecting elements. In addition, complex positioning driving is possible without an outer controller because the driver is built-in with positioning driving function. There are three kinds of shaft dia, 16mm, 25mm and 35mm. The maximum stroke is 1,253mm. The model is consisted of moving element SHM model and driver SHD model. ROH'LIX A linear actuator ROH'LIX has 6 precision ball bearings, and each 3 are fixed on each end of the aluminum block. They are attached with a uniform lead angle for the drive shaft to convert a rotation of drive shaft into an equilibrium linear motion. YRL Model A linear actuator ROH'LIX has 6 precision ball bearings, and each 3 are fixed on each end of the aluminum block. They are attached with a uniform lead angle for the drive shaft to convert a rotation of drive shaft into an equilibrium linear motion. Various other options such as linear shaft, linear guide or shaft block are available.

Product Detail :

Linear Motion

Miki pulley's linear motion products consist of very unique products, such as linear shaft drive and Rohlix. Linear shaft drive is a new cylinder model linear motor system which was designed to be driven by a most simple system. Rohlix converts rotational motion into linear motion by a lead of helix of six ball bearings installed in Rohlix at certain angles. Both are very unique Miki products.

Linear Shaft Drive

Linear shaft drive is a new cylinder model linear motor system which was designed to be driven by a most simple system. Driving without an external position sensor is possible because magnetic flux occurred from shaft enables position detection.　It can occur thrust force immediately after starting because position of magnetic pole can be detected by the built-in position sensor that enables operation without preparing with external magnetic pole detecting elements.　In addition, complex positioning driving is possible without an outer controller because the driver is built-in with positioning driving function.

SHM/SHD Model

SHM/SHD Model is a new cylinder model linear motor system which was designed to be driven by a most simple system.Driving without an external position sensor is possible because magnetic flux occurred from shaft enables position detection. It can occur thrust force immediately after starting because position of magnetic pole can be detected by the built-in position sensor that enables operation without preparing with external magnetic pole detecting elements. In addition, complex positioning driving is possible without an outer controller because the driver is built-in with positioning driving function. There are three kinds of shaft dia, 16mm, 25mm and 35mm. The maximum stroke is 1,253mm. The model is consisted of moving element SHM model and driver SHD model.

Rated thrust force	11 to 150N
Shaft dia.	16mm , 25mm and 35mm
Max. stroke	1,253mm

Catalog |

2D CAD data |

ROH'LIX

A linear actuator ROH'LIX has 6 precision ball bearings, and each 3 are fixed on each end of the aluminum block. They are attached with a uniform lead angle for the drive shaft to convert a rotation of drive shaft into an equilibrium linear motion.