E-Catalog > 998 Maxcess - Fife, Tidland, Magpowr > Spyder Plus

Designed for precise tension control, MAGPOWR’s cost-effective Spyder Tension Control is capable of controlling web tension in closed-loop, open-loop, unwind, rewind, point-to-point or dancer applications. It measures tension from one or more MAGPOWR load cells and outputs a corrective analog signal to control a torque device. Its reduced size means it can be hidden away in an enclosure or underneath the machine.

With its Ethernet connection, the easy-to-use Spyder can be viewed on a web browser for remote troubleshooting, programming and/or data collection. Additionally, the Spyder provides an analog input for Manual Level setpoint, control inputs for Run/Stop, Auto/Manual: Tension On/Off, and E-Stop, and a 0-1 mADC meter output proportional to measured tension.

The most recent version of the Spyder - Spyder Plus - adds the ability to control open loop applications, advanced features for dancer applications, and the ability to interface and share data remotely. Spyder Plus now has powerful features for dancer applications that were once only available with more expensive controls. Dancer mode now allows the unique ability to use load cells to monitor web tension, while remote setpoint adjustment improves efficiency, especially when multiple controls are used in the same application. Spyder Plus also works with third party ultrasonic or laser sensors to determine roll diameter.

Key Features

Powerful tension control at an affordable price used to control clutches and brakes, or interface directly with a drive
Troubleshooting and parameter access via a web browser
Share data remotely with a PLC or remote PC via Ethernet with Modbus/TCPIP
Advanced features for Dancer applications including Dancer Mode and Remote Setpoint Adjustment
Adjustable taper tension
User-friendly keypad and display
Versatile control for unwind, rewind, point-to-point or dancer applications
Compatible with any 3rd party ultrasonic or laser sensor (0 to 10 Vdc signal required)
UL and CE Approved

Specifications

Supply Voltage: 24 VDC, ±10%, 250 mA, 6 VA

Enclosure: IP-20 (IEC529)

Temperature Range:
Operating: - 0˚ C to 50˚ C
Storage: -30˚ C to +80˚ C

Inputs (from load cell or dancer position):
Load cell: 2.1 mV/V using +5 VDC and -5 VDC across one 350 ohm sensor or two 350 ohm sensors in parallel
Tension Setpoint, Manual Setpoint: 0 VDC to +10 VDC, 0.25 mADC maximum, or 1k to 10k ohm potentiometer
E-Stop, Run/Stop, Tension Off, Auto/Manual: switch closure or 5 VDC or 24 VDC active high/low logic, 8 mADC maximum
Dancer Position: 1k to 10k ohm potentiometer or a 0 to 5 VDC signal

Outputs:
Torque (Main Output):
0 to +10 vdc, 1 mADC maximum
4 to 20 mADC, 500 ohm maximum
-10 to +10 vdc, 1 mADC maximum
Tension meter: 0 to 1 mADC or 0 to +10 VDC analog
Communications: Ethernet, Modbus TCP/IP, FTP Client, HTTP Web Server Interface

Web Browser File Format: html

Ultrasonic or Laser Sensor for Diameter Input: 0 to 10 vdc signal

สนใจติดต่อขอรายละเอียดเพิ่มเติมได้ที่

บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด

Tel: 02-223-2271-3

Fax: 02-225-5546

E-mail: info@namsae.co.th

Website: www.namsae.com

Facebook: www.facebook.com/namsaefanpage

Line: @namsae

Instagram: namsae_official